Description
Includes:
Spindle Chiller Option
A Axis Drive (No wires or table)
Tool Holders
| Capacity: | VMX30i |
| X, Y, Z -axis Travel | 30” x 20” x 24” |
| Table Working Surface | 40” x 20” |
| Table T-Slots | 5 x .71 on 3.94 Centers |
| Maximum Table Load | 3000 lbs. |
| Spindle Nose to Table | 6” to 30” |
| Coolant Capacity | 70 gallons |
| Floor to Table Surface | 35″ |
| Spindle: | VMX30i |
| Spindle Taper | CAT 40 / Big Plus |
| Spindle Speed | 12,000 RPM |
| Spindle Motor Horsepower (1 min.) | 18 HP |
| Spindle Motor Torque (1 min.) | 158 ft-lbs. at 600 RPM |
| High Torque Option RPM | 10,000 RPM |
| High Torque Option Rating | 185 ft-lb @ 500 RPM |
| Motion: | VMX30i |
| Rapid Traverse Rate X,Y (ipm) | 1,378 ipm |
| Rapid Traverse Rate Z (ipm) | 1,181 ipm |
| Max Programmable Feedrate | 1,181 ipm |
| Least Command Increment | 0.0001” |
| Positioning Accuracy (10 pass Vdi 3441 Method) | -/+ 0.0002” |
| Repeatability (10 pass VDI 3441 Method) | -/+ 0.0001” |
| Positioning Accuracy with Optional Linear Scales (10 pass Vdi 3441 Method) | .0002″ |
| Repeatability with Optional Linear Scales (10 pass VDI 3441 Method) | .00016″ |
| Automatic Tool Changer: | VMX30i |
| Number of Stations | 30 |
| Tool to Tool ATC Time | 2 Seconds |
| Tool Changer Type | Electronic |
| Maximum Tool Diameter | 3.1” |
| Maximum Tool Length | 11.8” |
| Machine Dimensions: | VMX30i |
| Floor Space Required (W x D x H) | 85.9” x 96” x 108.2” |
| Maximum Operating Dimensions (W x D x H) | 151.1” x 156.5” x 108.2” |
| Machine Weight | 10,692 lbs |
| Machine Shipping Weight | 11,023 lbs. |
| Shipping Dimensions (W x D x H) | 90.6” x 116.1” x 101.5” |
| Chip Conveyor Shipping Dims. | 24” x 106” x 60.7” |
| Chip Conveyor Shipping Weight | 800 lbs. |
| Voltage Required | 210-240 VAC / 60Hz |
| Power Rating / Full Load KVA | 22 KVA |
| Air Requirements | 5 CFM @ 80-100 psi |
